In the process of urban construction and various engineering projects, the fence plate plays a crucial role as a sturdy barrier. It can not only effectively isolate the construction area from the outside world, ensure construction safety, reduce the impact of construction on the surrounding environment and residents' lives, but also enhance the overall image of the construction site. However, the installation of the fence plate is not arbitrary and contains many key points. The correct installation method is the core to ensure that the enclosure panel fully functions and is stable and durable for use. So, what are the key points to pay special attention to when installing the fence plate?

1. Preparation before installation

1. On site survey: Before installation, a detailed survey of the construction site is required to understand the terrain, topography, underground pipeline distribution, etc., to ensure that the installation location is reasonable and does not affect other facilities.
2. Material inspection: Check the quality of the fence plate and its accessories (such as columns, beams, connectors, etc.) to ensure that there is no damage, deformation, or rust, and that the specifications and models meet the design requirements.

3. Tool preparation: Prepare the necessary tools for installation, such as drills, wrenches, level rulers, plumbs, etc., to ensure that the tools are complete and in good condition.

2. Key points of installation process

1. Basic processing:
According to the design requirements, the installation foundation should be leveled, compacted, or poured with concrete to ensure its stability.
If installed on soft soil foundation, reinforcement measures should be taken, such as driving pile foundation or laying gravel layer.
2. Column installation:
The column should be installed vertically and calibrated using a level ruler and plumb line to ensure that the vertical deviation does not exceed the specified value (such as ± 5mm).
The spacing between columns should be uniform and meet the design requirements, generally not exceeding the specified maximum spacing (such as 3 meters).
The connection between the column and the foundation should be firm, fixed with expansion bolts or embedded parts to ensure wind resistance.
3. Installation of fence plate:
The fence plate should be flat without warping, tightly connected to the column, and fixed with specialized connectors or bolts.
There should be appropriate gaps (such as 5-10mm) between the baffles to prevent deformation caused by thermal expansion and contraction.
The installation height should be consistent, the top should be level, and a water blocking plate or drainage hole can be set at the bottom to prevent water accumulation.
4. Reinforcement and stability:
Install crossbeams at the top or middle of the fence plate to increase overall stability.
For long-distance enclosures, slant support or stay cables shall be provided to prevent toppling caused by wind load or external force.

Regularly check if the connectors are loose and tighten them in a timely manner.

3. Post installation inspection and maintenance

1. Safety inspection: After installation, conduct a comprehensive safety inspection to ensure that the fence plate is stable, without tilting or loosening.
2. Cleaning and maintenance: Regularly clean the surface of the fence plate, remove stains and debris, and maintain a clean appearance.
3. Maintenance and replacement: When damaged enclosure panels or accessories are found, they should be repaired or replaced in a timely manner to ensure safe use.
4. Precautions
During the installation process, safety operating procedures should be followed and safety protective equipment should be worn.
The installation location should avoid traffic arteries or densely populated areas to minimize the impact on the surrounding environment.
The installation height should be determined according to the construction environment, safety requirements, and relevant regulations, generally not less than 1.8 meters.
Following the above installation points can ensure that the fence plate is installed firmly, safely, and aesthetically pleasing, effectively exerting its isolation and protection functions.
The installation points of the fence plate, every detail is related to construction safety and the harmony and stability of the surrounding environment. Strictly following these installation points is a responsibility for the safety of construction personnel and a guarantee for the normal life of surrounding residents. Only by ensuring that the installation of the fence plate is standardized and firm can it truly play its role in isolating, protecting, and beautifying the environment during the construction process, allowing urban construction to steadily advance on a safe and orderly track.